A dismantling method statement devotes 40% of its content to ground operations. Why? Because most injuries occur not at height, but during slinging, unslinging, and transport.
All team members must use a dedicated radio frequency.
: Use of radio services for coordination between operators, supervisors, and riggers. SafeWork NSW 2. Pre-Dismantling Preparation
Tower cranes are temporary structures used in construction projects to lift and place heavy loads. Once a project is completed, the tower crane must be dismantled and removed from the site. Dismantling a tower crane is a complex process that requires careful planning, specialized equipment, and trained personnel. A Tower Crane Dismantling Method Statement is a critical document that ensures the safe and efficient dismantling of the crane. tower crane dismantling method statement
: Inspect the crane, auxiliary equipment, rigging, and tools before each use.
A professional method statement should be developed in accordance with recognized international standards and codes of practice. Key documents that inform best practices include:
Clear the slewing area of obstructions. Ensure the ground bearing capacity for the mobile crane is verified for the total load (crane parts + mobile crane weight). A dismantling method statement devotes 40% of its
For large tower cranes, an entire sequence of controlled lifts is executed to dismantle the crane piece by piece: climbing frame, cab assembly, and tower sections.
Assemble the mobile crane's counterweights and fly jib (if required) under strict supervision.
Rig the mobile crane lines to the main jib using a balanced two-point or four-point hitch at the manufacturer's specified center-of-gravity points. All team members must use a dedicated radio frequency
Lift the mast section clear and lower it to the ground. Repeat this sequence until the base section is reached. Step 8: Base Section and Anchor Disassembly
Highly specialized technicians who physically unbolt, unpin, and separate the structural sections of the tower crane. 3. Required Machinery, Tools, and Equipment