Rok Power Washer Instructions New =link= -

To ensure your machine operates safely and lasts for years, it is crucial to follow the correct setup and operating procedures. This article provides comprehensive, step-by-step instructions for your new ROK power washer, covering everything from unboxing to maintenance. 1. Unboxing and Initial Assembly

Turn your outdoor garden tap completely open. The water flow must be continuous and unrestricted.

Always drain all water from the pump, hose, and gun before storing in a freezing climate to prevent damage.

Turn the power switch on the machine to the position. Unplug the electrical cord from the wall outlet. Turn off the outdoor water supply faucet completely. rok power washer instructions new

: Inspect the spark plug for wear and ensure the air filter is clean. Leaking Connections

Before you connect a hose or plug into an outlet, lay out all the components on a flat surface. Your ROK power washer box should contain the following:

Before turning the power on, you must prepare the pump to prevent permanent damage. To ensure your machine operates safely and lasts

Proper cleaning is about choosing the right nozzle and maintaining distance.

Screw one end of the high-pressure hose into the water outlet on the machine and the other end into the spray gun handle. Ensure they are tightened firmly by hand.

Air trapped in the pump creates dangerous pressure spikes. Grab the spray gun, point it in a safe direction, and squeeze the trigger. Hold it down until a steady stream of low-pressure water flows out of the nozzle. Release the trigger. Step 3: Turn on the Machine Unboxing and Initial Assembly Turn your outdoor garden

This low-pressure nozzle automatically draws detergent from the onboard soap tank. Soap will not draw if any other colored nozzle is installed. 5. Shutting Down Safely

: Flip the main toggle switch to the "On" position. Note that some electric models only engage the motor when the trigger is pulled. 4. Nozzle Selection High Pressure

ROK washers generally come with quick-connect nozzles. Pull back the collar on the end of the spray wand and insert the desired nozzle tip, then release the collar to lock it into place. Extremely high pressure. Use with caution. Yellow (15°): Intense cleaning (concrete). Green (25°): General cleaning (siding, decks). White (40°): Light cleaning (windows). Black (Soap): Low pressure, for applying detergents. Step 4: Purge Air from the System