Manual Controle Universal Articco Th-msur-40 ((better))

Finding the right code is the key to programming. Below is a list of common 4-digit codes that are known to work with the Articco TH-MSUR-40 for many brands. If your specific brand is not listed, the auto-search method is the best alternative.

: If "ERROR" appears during manual input, the code is incorrect; try another from the list. Partial Control

Press and hold the corresponding (e.g., TV ) on the remote control.

Syncs with up to 4 different brands/models (TV, AC, DVD, Audio). manual controle universal articco th-msur-40

If you need to clear all settings, you can often perform a reset by removing the batteries and holding the

If you would like more specific help with your remote, tell me:

[ Preparation ] Plug in AC to Standby Mode │ ┌────────────┴────────────┐ ▼ ▼ [ Manual Pairing ] [ Automatic Search ] 1. Hold 'SET' button 1. Hold 'SET' 6+ sec 2. Enter 4-digit code 2. Remote scans codes 3. Click 'OK' to save 3. Unit beeps -> Press 'OK' Method 1: Direct Manual Code Entry Finding the right code is the key to programming

The Articco TH-MSUR-40 is a universal remote control primarily designed for the HVAC industry. Users typically turn to it as an affordable and convenient replacement for lost, damaged, or incompatible original remote controls. Its versatility aims to solve the frustrating problem of managing multiple devices with different remotes.

Verify the appliance's line-of-sight is unobstructed. Ensure you are standing within 8 meters of the device. If the automated scan passes the code before you can press a button, run a manual search to step back to the correct code index. The remote screen turns blank or loses brightness.

Use this method if the specific 4-digit code for your device is known. : If "ERROR" appears during manual input, the

Press and hold the SET button for approximately 10 seconds until the code numbers on the LCD begin to flash and climb.

Some versions of the Articco TH-MSUR-40 include a learning function for buttons that don't work.

Point the remote at the device and press the (Channel Up) button repeatedly and slowly. Each press sends a different code signal.

To help find the exact settings for your specific entertainment system, let me know: The of your television?