What (such as an update, root attempt, or drop) caused the device to brick? Share public link
Hold down the for roughly 10 to 15 seconds until the device vibrates and the "Infinix" logo appears on the screen.
If the phone is completely dead and won’t enter Recovery Mode through buttons, you can still force a factory reset using ADB and a computer. This method works only if the phone is detected by the computer.
If you have tried , changed USB cables, used a different PC, and still get "BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)," your hardware might be damaged. However, this is rare. How to Unbrick INFINIX Note 30 Pro
If your phone can boot to Recovery Mode but not to Android, use this method. It requires a microSD card.
Your volume buttons might not be making proper contact, or the device was not fully powered down before connecting. Let the battery drain completely, or try using an MTK Bypass tool if security features are blocking the connection.
The INFINIX Note 30 Pro is powered by the MediaTek Helio G99 chipset. Your PC needs specific drivers to communicate with the phone when it is powered off. Download and install the package. 2. SP Flash Tool or Infinix Flash Tool What (such as an update, root attempt, or
Click the Choose button next to the "Authentication File" field. Navigate to the SP Flash Tool folder or the ROM folder to locate the auth_sv5.auth file (if required by your firmware package).
Windows often blocks unofficial drivers from installing correctly. Follow these steps to ensure a clean installation:
Depending on the firmware packaging available, you will use one of two official tools: This method works only if the phone is
For devices that are unresponsive or if a factory reset fails, you must re-flash the official firmware. Prerequisites HardReset.info Hard Reset INFINIX Note 30 Pro
Avoid selecting "Format All + Download" unless absolutely necessary, as this deletes your phone's unique IMEI numbers and calibration data, resulting in a loss of network signal. Step 5: Execute the Flash Procedure With the files loaded, you are ready to unbrick the device:
Navigate to your extracted SP Flash Tool folder. Right-click on flash_tool.exe and select . Step 2: Load the Authentication and Scatter Files