((better)) | Bonavita Sheffield Lifestyle Crib Instructions

The footboard is shorter than the headboard. Do not confuse the two.

3-inch bolts, 2.5-inch bolts, barrel nuts, and wooden dowels. Mattress Requirements: Any mattress used must be at least inches, with a thickness between 4 and 6 inches. Assembly Instructions 1. Assemble the Frame

Position the front rail between the front corner posts. Insert barrel nuts into the pre-drilled holes and secure with 2.5-inch bolts. bonavita sheffield lifestyle crib instructions

Use barrel nuts if required by your specific model year. Insert the nut into the rail hole first, aligning the "slot" so the bolt can thread into it. 3. Install the Mattress Spring (Support) This is the most critical step for safety.

: Secure the headboard and footboard to the side frames using Allen head bolts and washers. For the footboard, pre-thread four bolts into the bottom legs before final attachment. The footboard is shorter than the headboard

Begin by attaching the back panel to the side legs. A common tip for Bonavita models is to keep the bolts initially; this allows for slight adjustments and prevents the wood from stripping if things aren't perfectly aligned. Once the back and sides are connected, you can move on to the front rail. 3. Installing the Mattress Support

The first step in assembling your Bonavita Sheffield Lifestyle Crib is to build the crib frame. To do this: Mattress Requirements: Any mattress used must be at

Before you start, lay out all components on a soft, clean surface (like a rug or blanket) to prevent scratching the wood. It's helpful to take inventory of all parts. Common components include:

Wipe the wood down with a soft, clean, lint-free cloth.

: Lay down a large blanket, a piece of cardboard, or a rug to prevent scratching the finish on the wooden crib pieces.

Align one of the side panels (end pieces) at a 90-degree angle to the back panel.