Ua300 Factory Reset — Zkteco

Press . The device will prompt you with a confirmation message (e.g., "Restore to default settings?"). Select OK to confirm.

Sarah first tried the digital approach. She remembered a manual mentioning ZKTeco attendance software ZKTime 5.0

A reset restores the default IP address (typically 192.168.1.201 ). Note down your current network configuration so you can easily reconnect the device to your local area network (LAN) afterward.

This method works if you know the or if the device does not have an admin password set. zkteco ua300 factory reset

Ensure the UA300 status shows as "Connected" or "Online" in the device management tab. Select the specific UA300 device from your list. Look for the or AC Parameters panel.

Click on (if you only want to clear the lock) or Restore Factory Settings . Wait for the success confirmation popup.

This is the most searched method. When the screen is locked, the admin password is unknown, and the network settings are wrong, you must perform a . Sarah first tried the digital approach

Even with clear instructions, things can go wrong. Here’s how to fix the most common problems related to .

The ZKTeco UA300 is a powerful and reliable biometric terminal, but like any sophisticated device, it sometimes needs a fresh start. Whether you choose the menu-driven reset, the hardware jumper method, or the USB recovery approach, you now have a comprehensive toolkit to regain full control of your device.

A factory reset will delete all attendance logs and user data (fingerprints, faces, and passwords). If you need to keep this data, you must download it to your PC via the software (ZKTime.Net, ZKBioTime, etc.) before proceeding. This method works if you know the or

A reset will often return the device to its default IP address (usually 192.168.1.201 ).

Detailed hardware instructions can also be found in the ZKTeco Admin Password Reset guide from . Important Considerations Before You Reset

If the device is still accessible, always perform a complete data backup through your attendance management software before initiating a reset.

The UA300 motherboard has a or test pads (varies slightly by revision).