Download [new] Driver Cutting Plotter Jinka 1351 Link 99%
Fix : The COM port number in your software does not match the Windows Device Manager. Check Device Manager and update the software settings.
and insert the USB cable into a dedicated USB 2.0 port on your motherboard. Avoid using unpowered external USB hubs.
Wait for the dialog box reading "Driver install success!" to appear. Step 2: Identify the COM Port Assignment
, your machine contains either an or a Prolific USB-to-Serial communication chip. Download the package that matches your hardware:
Plug in the USB or Serial cable only after the driver installation is complete to allow Windows to recognize the device. Compatibility Notes Driver Jinka 1351 28 - Facebook download driver cutting plotter jinka 1351 link
: Locate setup.exe inside the extracted folder. Right-click the file and select Run as Administrator .
Download Jinka CorelDRAW Driver Package (ZIP) [Note: Replace with official regional distributor link like Jinka Indonesia or Jinka India depending on your machine source] Download CH340 USB Driver for Windows 10/11 (64-bit) FTDI USB Serial Driver (For Premium/Pro Jinka Models) Download FTDI VCP Drivers for Windows ArtCut / FlexiSign Jinka 1351 Device Profile Download Jinka 1351 Profile for ArtCut 2. Understanding Your Jinka 1351 Connection Setup
On Windows, right-click the Start Menu and select . Expand the Ports (COM & LPT) subheading.
Given the number of Jinka 1351 variants (e.g., XE-1351, GH1351, JK1351, PE1351, XL1351, NXL AC 1351), this guide focuses on the generic driver needs that apply to most 1351 models. Fix : The COM port number in your
- As shared by Jinka enthusiasts, this includes drivers for various models including the Pro series.
Many users have successfully used the provided with the machine. This includes the necessary USB drivers and software to operate the plotter.
If you’ve recently acquired a Jinka 1351 or are reinstalling your workstation, finding the right driver is the most critical step to getting your vinyl cutter running. The Jinka 1351 is a workhorse in the signage industry, but because it often uses a USB-to-Serial interface, Windows doesn't always recognize it automatically.
For any of these software options, the setup process is generally the same: install the software, select "Jinka" or a generic "HPGL" plotter from the device list, and then select the correct communication port (COM or USB). Avoid using unpowered external USB hubs
If you encounter issues during driver installation or plotter operation:
The Jinka 1351 typically uses a compatible with Windows 7, 8, 10, and 11 (32-bit and 64-bit). It often emulates a HP-GL or DMPL language, making it compatible with generic plotting drivers.
Use a tool like WinRAR or 7-Zip to extract the downloaded ZIP folder.
The Jinka 1351 series utilizes specific USB-to-Serial communication chips. Check your machine's version to download the correct driver file:
Right-click your COM port entry in Device Manager and select . Navigate to the Port Settings tab.
