Ensure the device is powered off completely before connecting. BROM Error or Status Connection Failed

This error usually indicates an unverified authentication issue. You may need an updated SP Flash Tool version or an MTK Bypass tool to temporarily disable the secure boot protection before clicking the download button.

Click the green button at the top of the SP Flash Tool interface. The tool is now waiting for the device connection. Turn off your Tecno Spark 30C completely.

Right-click the setup file ( .exe or .inf ) and select . Follow the on-screen prompts to complete installation. Restart your computer to apply the system-level changes. 🖥️ Step 2: Prepare SP Flash Tool and Firmware

If you need help resolving a specific error code or locating the right files, tell me: What is the of your Spark 30C? What error code or message is the flash tool showing? What operating system is your PC running?

Up to 15 minutes. If it exceeds 20 minutes, force restart by holding Power + Volume Down for 15 seconds.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Boot into recovery mode (Hold Power + Volume Up) and perform a "Wipe Data / Factory Reset" to clear conflicting system cache.

Warning: Never select "Format All + Download" unless you have explicitly backed up your phone's NVRAM calibration data. Choosing this will wipe your device's unique IMEI numbers, destroying network connectivity. ⚡ Step 4: Execute the Flashing Process

Press and hold the for roughly 10 seconds to reboot your device.

Flashing firmware carries risks. To avoid "bricking" your phone, ensure you have: A Full Backup: Flashing will erase all data, including photos and apps. High Battery Level:

: After flashing, test network, camera, and sensors using an app like Device Info HW to confirm all partitions flashed correctly.

Extract the SP Flash Tool zip file into a dedicated folder on your local drive (e.g., C:\SP_Flash_Tool ).

A yellow progress bar will display the transfer status of the system images. Do not disturb the phone or cable during this period.