: Navigate to "Add Device" > "OneIP" to add your HDL-MBUS01IP (or similar IP gateway). This gateway acts as the bridge between your PC and the wired bus.
Always label your Subnets and Devices clearly. In large projects, "Device 55" is impossible to track, but "Master_Bed_Keypad" is easy.
Define button functions (single click, double click, long press). Adjust sensor sensitivity (motion, lux, temperature). Set dimmer curves and ramp times. Configure logic modules and scene controllers. 3. Advanced Programming and Logic hdl buspro setup tool 2
Click the Search button. The tool sends a broadcast signal across the network. Devices will populate in a list, showing their current Subnet ID, Device ID, and model type.
A TCP/IP interface (like the HDL-MBUS-IP) is required to connect the PC to the Buspro network. Installation and Connection : Navigate to "Add Device" > "OneIP" to
Key Features (practical notes)
Decide on a clear naming system for subnets, areas, and channels early in the project to make long-term troubleshooting easier. In large projects, "Device 55" is impossible to
To run HDL Buspro Setup Tool 2 smoothly, the following specifications are recommended: