to identify the controller version before attempting a flash. User Experience Reflash attempts are often a "last resort" for dead drives.
Note: Burner and Firmware files must precisely match your NAND Flash memory ID (e.g., Toshiba TLC memory requires a different firmware file than Hynix MLC memory). Step 3: Configuring the MPALL Ini File
:
Run the extraction tool and look closely at the output text.
. Choosing incorrect firmware or interrupting the flashing process can render your USB drive completely unrecognizable to any system. Phison Mpall V5.03.0a-dl07
. Low-level formatting completely erases all data on your USB drive. Back up anything important before proceeding.
If you are trying to "unbrick" a drive with this tool, follow this general workflow: to identify the controller version before attempting a flash
Enter the exact and PID strings discovered by ChipGenius in Step 1. In the Firmware section: Check the Do ISP box. Browse and select your correct Burner file ( .bin ). Browse and select your correct Firmware file ( .bin ). Save this profile as MP.ini inside the main MPALL folder. Step 4: Executing the Flashing Process
: Using the wrong firmware version (e.g., trying to flash TLC firmware on a drive it doesn't support) can permanently "brick" the device. Step 3: Configuring the MPALL Ini File :
If your controller reads , then version V5.03.0A-DL07 is highly compatible with your hardware. Step 2: Gathering the Right Files