Click "Download" in the SP Flash Tool to begin flashing the firmware or removing FRP. Alternative: BG2-W09 FRP Bypass Without Test Point
Click the button in SP Flash Tool to begin the firmware flashing process.
Once the PC detects the device, remove the tweezers immediately. Step 5: Flash the Firmware Switch over to the window. The connection port should now be automatically detected.
The test point for the BG2-W09 is located on the mainboard, usually near the processor shielding cover. It is a tiny golden dot. bg2-w09 test point
Ensure the battery has at least some residual charge, or use a power source that keeps the board stable during the shorting process.
To find the test point, you must remove the back cover of the Huawei MediaPad T3 7.0 (BG2-W09).
: On the motherboard, the test point for this model series is usually located near the LCD flex cable or battery connector. Click "Download" in the SP Flash Tool to
Look for a cluster of small, circular copper pads labeled near the main chip or display ribbon cable connection.
Carefully separate the display module from the back casing using a thin prying tool.
Work your way around the edges carefully to avoid snapping the plastic clips or damaging internal ribbon cables. Step 2: Locate the Test Point Pinout Step 5: Flash the Firmware Switch over to the window
Many popular dongles may lack specific support for this exact model; confirm compatibility with your specific software version (e.g., EFT or Chimera) before proceeding.
: Use a pair of metal tweezers to touch the test point and a metal shield (ground) on the motherboard at the same time.