Intronics Digital Room Thermostat User Guide Jun 2026

Place on an interior wall, roughly 1.5 meters above the floor, away from direct sunlight, draughts, or heat sources.

: Warns you when internal battery power is low. Padlock Icon : Shows that the thermostat buttons are locked. Button Functions

Check your schedule seasonally; your winter heating needs differ significantly from spring requirements.

If you are replacing an old thermostat:

Some models include "Turbo Cool" technology for rapid cooling. 4. Maintenance and Tips

The core functionality of your Intronics thermostat relies on its programming interface. While models vary, these are the standard operating procedures. Setting the Time and Day Press the or 'SET' button.

. These devices are commonly used for fan coil systems, mini-splits, and chilled water systems. Sangchai Group Key Controls and Display intronics digital room thermostat user guide

: Indicates the heating system is actively running.

This device is an electronic temperature controller designed to replace older mechanical thermostats. It provides precise temperature control for central heating systems.

Programming your thermostat automates temperature changes throughout the day. Most Intronics models use a 5+2 day schedule layout (Weekdays + Weekends) with four distinct time periods per day. Setting Time and Day Turn the thermostat . Place on an interior wall, roughly 1

Locate the battery compartment on the back of the device module.

Run wires through the wall and pull them through the opening in the back plate. Use screws to secure the plate to the wall.

: Use the △ (Up) or ▽ (Down) keys to set your desired temperature. The standard set-point range is 10°C to 35°C (50°F to 95°F). Button Functions Check your schedule seasonally; your winter

A: You can adjust the Temperature Offset setting. For the PI series, enter the installer setup (hold △ and ▽ for 10 seconds), navigate to Program 7 , and use the arrow buttons to set an offset between -2 and +2°C.