: Standard charging for car and truck batteries.

The EverStart Plus 60108M is a 25-amp, fully automatic smart battery charger designed primarily for 12-volt lead-acid batteries. Its standout features include a built-in "Start Aid" function to help jump-start a vehicle with a weak battery and a reconditioning mode that can help extend the life of aging batteries.

Working near lead-acid batteries is inherently dangerous due to explosive gases generated during standard operation.

Never allow the positive (red) and negative (black) clamps to touch each other while the charger is plugged in.

The order of connection is vital for safety to prevent sparks.

The manual specifies a strict sequence to avoid sparks at the battery terminal:

: Once complete, unplug the AC power first, then remove the clamps in reverse order (Black first, then Red). Common Troubleshooting Unit won't start

Coil the AC and DC cables loosely around the handle or cord wraps. Do not bend them sharply, as this can break the internal copper wires.

The "m" often indicates an older manual-digital hybrid or a specific batch for Walmart. The "i" typically stands for "Intelligent" or "Inverter-ready." Functionality is nearly identical. Both use the same manual instructions.

Once the engine starts, turn off and unplug the charger immediately, then remove the clamps. Troubleshooting Common Issues The Charger Has No Power / Meter Doesn't Move

The EverStart 60108M is a manual wheeled battery charger and starter designed for heavy-duty automotive, marine, and farm equipment applications. Unlike fully automatic modern chargers, a manual charger gives you complete control over the charging process, making it an excellent tool for reviving deeply discharged batteries. However, because it does not automatically shut off, operating it safely requires a clear understanding of its functions.