Driver Mtk Brom Vcom Hot Jun 2026

The specific driver required for your computer to communicate with the MediaTek chip via a USB cable while it is in Preloader or BROM mode.

If the driver shows a yellow exclamation mark, it is not working.

USB 3.0/3.1 ports often have timing issues with BROM mode. Use a black USB port, not blue or red. driver mtk brom vcom hot

Look for any greyed-out or active entries labeled MediaTek , MTK , Preloader , or VCOM .

Look at your computer's Device Manager. Under the "Ports (COM & LPT)" section, you should briefly see switch over to MediaTek DA USB VCOM Port . The specific driver required for your computer to

Or so it seems.

Use an MTK Auth Bypass Tool (LibUsb filter required) before running SP Flash Tool. Windows blocked the driver due to signature enforcement. Use a black USB port, not blue or red

If the device constantly connects/disconnects, it may be stuck in a bootloop. Try holding Volume Down while plugging in the USB cable to force VCOM mode.

Browse to your extracted driver folder and select the .inf file corresponding to your OS (e.g., Windows 7, 10) and architecture (x64 or x86).

👇 👇