first. If the device starts responding, you can re-flash the entire ROM including the preloader later. Bypass Tool Check
When flashing a full ROM, the tool tries to initialize the external RAM immediately to transfer large files. If the RAM configuration in the scatter file doesn't match the physical hardware (or if the RAM is damaged), the process crashes with an exception.
This error frequently triggers if you attempt to flash firmware for a different model (e.g., flashing Redmi 10A software onto a Redmi 9A, even if they share the same codename "dandelion"). Enable Auth Bypass: MTK Auth Bypass
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Ensure the battery is charged and the device is completely powered off before connecting. Troubleshooting Table: Common Error Codes Error Code Potential Solution EXT_RAM_EXCEPTION Use Custom DA or correct ROM 4032 S_FT_ENABLE_DRAM_FAIL Check for incompatible firmware 2004 S_BROM_DOWNLOAD_DA_FAIL Use MTK Auth Bypass tool 5054 S_DL_GET_DRAM_SETTINGS_FAIL Ensure all firmware files are loaded sp flash tool error status ext ram exception link
"STATUS_EXT_RAM_EXCEPTION" in SP Flash Tool primarily indicates a firmware incompatibility
Before SP Flash Tool writes the firmware to the device's internal storage (eMMC or UFS), it loads a small piece of code called the into the device's temporary external RAM. If the tool cannot access, test, or write to this RAM link, the process halts immediately to prevent hard-bricking the hardware. Primary Causes of the Error
If the preloader is corrupted, try holding the or Volume Down button while connecting the USB to force a specific boot state. 3. Verify Hardware Connection
If certain non-essential partitions (like userdata or cache ) are causing the halt, uncheck them in the partition list and try flashing again. 4. Update SP Flash Tool and Drivers If the RAM configuration in the scatter file
The STATUS_EXT_RAM_EXCEPTION error occurs during the initial handshake and memory initialization phase. Before the SP Flash Tool writes firmware to the internal storage (eMMC/UFS), it initializes the device's volatile memory (RAM) using temporary instructions.
If you have tried multiple firmware packages, altered DA files, switched computers, and bypassed authentication but still receive the STATUS_EXT_RAM_EXCEPTION error, your device likely has a physical hardware issue.
I can provide the specific or driver version you need once I have those details!
In SP Flash Tool, change the dropdown menu from Firmware Upgrade to Download Only to avoid re-writing critical partition tables that might be causing the RAM error. 6. Use the "Battery and Cable" Method This link or copies made by others cannot be deleted
| Error | Phase | Root Difference | |-------|-------|------------------| | S_DRAM_SETTINGS_FAIL | Preloader DRAM init | DRAM never became ready | | S_EXT_RAM_EXCEPTION | After DA loaded | DRAM works, but code crashes | | S_BROM_CMD_SEND_DA_FAIL | USB/transport | DA not transferred fully | | S_SECURITY_SECURE_USB_DL_DISABLED | Security | DA rejected by boot ROM |
Check Device Manager to ensure the device shows up as "MediaTek Preloader USB VCOM" without a yellow exclamation mark when plugged in. 4. The Hardware Connection Check Sometimes the simplest fix is physical.
For MediaTek devices, always keep a backup of your original preloader before flashing custom ROMs. You can dump it using mtkclient (open-source tool) on Linux.
tool alongside SP Flash Tool. Ensure the tool remains open while you set SP Flash Tool's connection to with the correct COM port. Hardware Check: