Diagnostic parameters for ladder logic.
Before changing any parameters, use the PUNCH feature on the control to save your existing parameters to an external device.
Power up the control while holding the and "." buttons simultaneously to enter the IPL (Initial Program Loader) screen . Fanuc 10m Parameter Manual
Ultimate Guide to the Fanuc 10m Parameter Manual: Backup, Optimization, and Troubleshooting
For most users, communications parameters are the most frequently accessed. Proper configuration is essential for program transfer and DNC operation. Diagnostic parameters for ladder logic
| Parameter 5110 Value | Handshake Type | |----------------------|----------------| | 3 | Xon/Xoff (software) | | Other values | Hardware handshaking (RTS/CTS) |
The machine will instantly trigger a (Parameter Write Enable alarm). This is normal. Do not panic. Leave the alarm active while you modify your parameters. Ultimate Guide to the Fanuc 10m Parameter Manual:
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Connect your RS-232 serial cable to the machine and computer.
Defines the Input/Output device channel (usually set to 0 or 1 for the standard RS-232 port).
As a legacy system, the original paper manual is hard to find. However, the documentation for the "Fanuc System 10/11/12 Series" is often available through industrial technical documentation sites.