Adjustment Program Epson Px660 -

: Run the program and select "Particular Adjustment Mode" . Procedure : Navigate to "Waste ink pad counter" and click OK.

A: No. You need a Windows PC or a Windows virtual machine (Parallels, VMware) on Mac.

A pop-up box will appear reading "Please turn off the printer." Push the physical power button on your PX660 to turn it off. Click OK on the computer screen, wait 10 seconds, and turn the printer back on. adjustment program epson px660

Once the program opens, it should detect your printer model and the USB port it is connected to. Select the correct model and port from the dropdown menus.

It is an official Epson tool for end-users, but rather a service tool leaked from authorized service centers. : Run the program and select "Particular Adjustment Mode"

The Adjustment Program is a diagnostic tool, usually reserved for authorized service centers, that communicates directly with the printer's firmware to: back to Perform Head Cleaning and alignment. Read/Write Printer IDs and firmware. Why You Need the Adjustment Program (PX660)

A cost-effective alternative to replacing the physical pads or purchasing a new printer. How to Use the Epson PX660 Adjustment Program You need a Windows PC or a Windows

: Resets the software counter that tracks ink usage during cleaning cycles. Print Head ID Input

Before using any adjustment program, please be aware of the following:

Before starting, ensure your Epson PX660 is connected directly to your Windows PC via a . The software will not work over Wi-Fi or network sharing networks. Step 1: Download and Extract

The program will ask you to turn off the printer. Turn it off, then click . Turn the printer back on, then click OK . The waste ink pad counter is now reset to 0%. Important Tips and Troubleshooting