C1130-k9w7-tar.124-3g.ja1.tar Here
This firmware is not for the 1130AG in lightweight mode (which uses a different .bin file). If your AP has been converted to join a Wireless LAN Controller, you must first use the recovery procedure described below.
Operates simultaneously on both 2.4-GHz (802.11g) and 5-GHz (802.11a) bands.
If the calculated checksum does not match Cisco’s published value, do not use the file – corruption or tampering may have occurred.
: Identifies the hardware platform. This software is built specifically for the Cisco Aironet 1130AG Series Go to product viewer dialog for this item. hardware architecture. C1130-k9w7-tar.124-3g.JA1.tar
Every segment of the filename C1130-k9w7-tar.124-3g.JA1.tar corresponds to specific hardware compatibilities and feature sets designed by Cisco Systems.
: Defines the functional feature set. The w7 string identifies Autonomous (standalone) firmware . In contrast, w8 denotes lightweight firmware managed by a controller. The k9 designation indicates support for strong cryptographic encryption (like AES and WPA2).
They press and hold the while plugging the power back in. This firmware is not for the 1130AG in
Identifies an image with strong 'k9' crypto capabilities. tar Distribution Format
No. The “C1130” prefix is specific to the 1130AG platform. Using it on other models will brick them.
: Indicates this image is designed for the Cisco Aironet 1130 Series APs. If the calculated checksum does not match Cisco’s
For official documentation and support, you can visit the Cisco Support Community .
System image file is "flash:/c1130-k9w7-mx.124-3g.JA1/c1130-k9w7-mx.124-3g.JA1"