Emax Es08ma Ii Datasheet _hot_ Today

The EMAX ES08MA II is suitable for a variety of applications, including:

rail. While a microchip can supply enough current for an idle servo, the ES08MA II pulls up to

The EMAX ES08MA II is a compact and lightweight brushless motor that offers high efficiency, reliability, and durability. It is designed to provide a high power-to-weight ratio, making it suitable for applications where space and weight are limited.

While you can power a single ES08MA II from your Arduino's 5V pin for testing purposes, it is not recommended for final projects, especially when moving multiple servos or applying loads. Under load, a servo can draw a significant amount of current. For reliable operation, it is highly recommended to use a separate, dedicated or battery pack with sufficient current capacity (at least 1A per servo to be safe). Remember to connect all grounds (Arduino, servo power supply, etc.) together to create a common reference. Emax Es08ma Ii Datasheet

Characteristics * Working voltage: 4.8V ~ 6.0V. * Operating current: 200mA. * Speed: 0.12sec / 60g at 4.8V; 0.10sec / 60g at 6V. * Amazon.com

Please note that this text is a general representation and might not reflect the actual specifications and features of the EMAX ES08MA II. For accurate and detailed information, it's recommended to consult the official datasheet or contact the manufacturer.

The Emax ES08MA II is an analog servo designed for small-scale applications requiring precise angular positioning. Its primary distinction from the original ES08MA is an improved gearset and electronic design for better reliability. The EMAX ES08MA II is suitable for a

3D flight in foam airplanes, gliders, and small fixed-wing models. ReadyMadeRC Mini SERVO (ES08MAII) SERIES

| Parameter | Value | |-----------|-------| | | Analog (not digital) | | Dimensions | 23.0 x 11.5 x 24.0 mm (0.91 x 0.45 x 0.94 in) | | Weight | 9.0 g (0.32 oz) including wires and horn | | Operating Voltage | 4.8V – 6.0V (regulated BEC recommended) | | Stall Torque (4.8V) | 1.5 kg·cm (20.8 oz·in) | | Stall Torque (6.0V) | 1.8 kg·cm (25.0 oz·in) | | Speed (4.8V) | 0.12 sec/60° (no load) | | Speed (6.0V) | 0.10 sec/60° (no load) | | Dead Band Width | ≤ 5 µs (typical analog response) | | Control Signal | PWM 1000–2000 µs, 50 Hz (standard RC) | | Rotation Angle | 180° (max mechanical, may exceed electrical limit) | | Connector | JR/Futaba universal (3-pin, 0.1" spacing) | | Wire Length | 180 mm (approx. 7.1 in) |

The EMAX ES08MA II Go to product viewer dialog for this item. While you can power a single ES08MA II

Standard 3-pin universal plug compatible with most receivers (JR/Futaba). Cable Length: Typically 25 cm.

The is a highly reliable micro analog servo motor widely used in hobby robotics, RC airplanes, and small-scale automation. Delivering a balanced combination of high torque, quick response time, and an all-metal gear train, this