Canon Service Tool V5510 < PRO >

Resetting the digital waste ink counter does not physically clean the ink pads. If you clear the error digitally without physically replacing or washing the felt pads inside the base of the machine, excess ink will eventually overflow out of the bottom case, potentially damaging furniture, carpets, or internal electronic routing.

Triggers powerful print head cleaning cycles that are more intensive than the standard options available in the basic Windows print driver.

MG2500, MG2570, MG2900, MG3000, MG3500, MG5500, MG5600, MG5700 MX470, MX490, MX530, MX920 Step-by-Step Guide: How to Use Service Tool v5510

To use the tool, the printer must first be placed in : Turn off the printer but keep it plugged in. canon service tool v5510

Inside every Canon printer is an absorbent pad (the waste ink absorber) that soaks up excess ink used during cleaning cycles. The printer keeps an electronic count of how much ink has been absorbed. Once this counter hits a pre-set limit, the printer stops working to prevent overflow. Service Tool v5510 resets this counter to zero, effectively telling the printer that a "new" pad has been installed.

Press and hold the Stop/Reset button (triangle in a circle).

: Instantly clears 5B00 and 1700 errors. Resetting the digital waste ink counter does not

| Feature | Function | |--------|----------| | Waste ink counter reset | Clears 5B00/5B01 errors | | EEPROM reset | Restores factory memory state | | Ink level reset | Forces full cartridge detection | | Service test prints | Diagnostic nozzle/EEPROM check | | Region change | Modifies printer’s regional settings |

The v5510 software interfaces directly with the printer's EEPROM memory chip. It clears the logic counters, removes the software lockout, and lets the machine print normally again. Core Features of the v5510 Version

The software will automatically detect your connected printer port. If all options are greyed out, your printer is not in Service Mode. Go to the tab. Locate the Clear Ink Counter section. Set the Absorber dropdown option to Main . Once this counter hits a pre-set limit, the

Wait roughly 10 seconds, then press the to turn the printer back on normally.

Using V5510 on a newer printer (e.g., a 2023 G-series or recent TS-series) can corrupt the firmware. Ensure your printer model is explicitly listed as compatible.

Deep-cleans the printhead nozzles directly via firmware commands.

Release the button. The power light should blink and then stay solid, indicating it is in Service Mode. Step 2: Connect and Run V5510