Press the drive tray handle closed until it clicks securely into place.
This section outlines the key steps for installing and integrating your NAJ-1501/DE224C into an existing NetApp E-Series or EF-Series environment.
Identify the failed drive via the amber fault LED on the drive tray or using the ONTAP command storage disk show -broken . Netapp Naj-1501 Manual
| Feature | Specification | |---------|----------------| | | 2U rack-mountable chassis (dual-controller capable) | | Processor | Intel Xeon (single or dual-core, ~1.6–2.0 GHz) | | RAM per Controller | 2 GB to 4 GB (upgradable depending on ONTAP version) | | NVRAM | 128 MB or 256 MB (for write journaling and data protection) | | Onboard Ports | 2x 1GbE (management/data), 2x 4Gb FC (optional), 1x 10/100 management port | | Expansion Slots | 2x PCIe (for adding NICs, HBAs, or additional FC/TB ports) | | Disk Connectivity | SAS (via external SFF-8088 or internal SAS expanders) | | Max Raw Capacity | ~120–200 TB (dependent on shelf type and disk size) |
: Approximately 53.8 lbs (24.4 kg) when fully loaded with drives. Configuration & Installation Guide Since the NAJ-1501 is the regulatory identifier for the , you should refer to the DS224C Disk Shelf Documentation Press the drive tray handle closed until it
Push the release button on the carrier handle to open the latch.
Look for the shelf ID (e.g., Shelf 3: NAJ-1501 ). | Feature | Specification | |---------|----------------| | |
Are you currently experiencing a ? Share public link
. It is designed for high-density, mission-critical environments, supporting up to 24 small form factor (SFF) 2.5-inch drives. This model is compatible with a wide range of NetApp controllers, including the AFF A-Series (e.g., A200, A300, A800) and FAS-Series (e.g., FAS2600, FAS8200, FAS9000).